When your scooter is turned on, pull one brake lever and hold the power and mode button for 2 seconds. Push power (left button) to cycle through the P-settings, push mode to change the setting.
P0 (kick and go / zero start function): 0 - Kick and Go turned on (you have to kick the scooter for the throttle to operate), 1 - Kick and Go turned off (Zero start turned on - the throttle works even when the scooter is not in motion) - we highly recommend you leave this at 0
P1 (speed limit): 0 - speed limit enabled to 15mph, 1 - speed limit disabled
P2 (wheel diameter): 8" - do not change
P3 - cannot change
P4 (display unit): 0 - km, 1 - miles