The Mantis comes with an advanced display that allows many customizations.
Check out the manual: https://drive.google.com/file/d/1HToYebxHqK0TTpSgqlShT9Z1UhA6Lco9/view?usp=sharing
Note that there is a mistake in the manual for the Mantis base model: magnetic pole setting (P2) should be 20 instead of 40 as indicated in the manual.
We have created an in depth guide with recommendations for the two models. have a look at the below videos.
Note for the Mantis base display only: some displays ship with an access code to access advanced P-Settings. In order to access P-Settings, please follow these steps:
1) Press both Mode and Power buttons for a few seconds to enter P-settings mode
2) 4 "zero" digits will appear which can be changed using the Mode button to the following code: 9221. For scooters delivered as of October 2020 use code 1500 (instead of 9221)
3) Use the Mode key to change each number, once the correct number has been selected press Power button to move to the next digit
4) When the full code 9221 has been entered, press Power button for a few seconds to enter P-settings